Foshan Dalong Chain
Equipments Sales Co., Ltd.
Equipments Sales Co., Ltd.
Leave Your Message
Precision-manufactured components designed to meet the ultra-high-frequency demands of international airport elevator systems.
International airports represent one of the most demanding and commercially significant application environments for vertical transportation components.
International airports are among the most operationally intensive environments on Earth. With passenger volumes routinely exceeding tens of millions annually at major hubs — from Beijing Capital and Dubai International to Heathrow and Hartsfield-Jackson Atlanta — the vertical transportation systems embedded within terminal buildings must perform flawlessly, 24 hours a day, every day of the year. Elevator car parts for international airports are consequently held to standards far exceeding those required in typical commercial or residential settings.
The global elevator and escalator market was valued at over USD 90 billion in 2023 and is projected to surpass USD 130 billion by 2032. Within this landscape, the airport segment commands a disproportionate share of premium component procurement, driven by strict regulatory requirements, extended operational cycles, and the critical need to avoid downtime that could disrupt tens of thousands of passengers. Maintenance contracts at major international airports frequently stipulate response times of under two hours for critical component failures, placing enormous pressure on supply chains to maintain robust inventories of certified spare parts.
From a commercial standpoint, airport authorities and airline terminal operators have increasingly shifted from reactive maintenance models to predictive and preventive maintenance strategies. This transition has accelerated demand for high-quality, standardized elevator car parts that can be sourced reliably, fitted rapidly, and certified to meet both local and international safety codes such as EN 81, ASME A17.1, and GB 7588. Suppliers capable of delivering these components with consistent quality, global logistics capability, and documented traceability have emerged as preferred strategic partners for airport facility managers worldwide.
The unique operational environment of international airports imposes technical and commercial requirements that set a new benchmark for elevator car parts.
Airport elevators may execute 500–1,200 operational cycles per day — five to ten times the average commercial building rate. Slide blocks, guide rail wheels, and door mechanisms must be engineered for extreme wear resistance and long service intervals without compromising passenger safety.
International airports host facilities governed by overlapping regulatory frameworks — from European EN 81 and American ASME A17.1 to Chinese GB 7588 and Singapore's SS 550. Elevator car parts must carry verifiable certifications and traceable documentation to satisfy diverse inspection authorities.
Standardized dimensions, universal fitment compatibility with major OEM platforms (Otis, KONE, Schindler, Mitsubishi), and readily available inventory are non-negotiable for airport procurement teams managing zero-downtime SLA obligations across multi-elevator terminal installations.
Modern airport elevators increasingly incorporate IoT-enabled condition monitoring. Control circuit boards and intercom systems must support integration with building management systems (BMS) and predictive maintenance platforms, enabling remote diagnostics and real-time alerts.
As international gateways serving passengers with diverse mobility needs, airports are subject to stringent accessibility regulations. Smooth-running guide rail systems, reliable handrail belts, and low-vibration car components are essential to delivering compliant, comfortable vertical transit for all users.
Five-party wireless intercom systems, emergency lighting circuits, and precision-calibrated safety gear components form a critical safety layer in airport elevator installations. Reliable communication between car, machine room, lobby, and emergency operators is a mandatory compliance requirement at certified international airports worldwide.
The airport elevator components sector is undergoing rapid transformation driven by digitalization, sustainability mandates, and evolving infrastructure demands.
Major international airports are deploying AI-powered maintenance platforms that analyze sensor data from elevator guide rail systems, oil lubrication components, and control boards in real time. This shift from time-based to condition-based maintenance is reducing unplanned downtime by up to 40% and extending component service life significantly, increasing demand for parts with embedded sensor compatibility.
Environmental sustainability targets adopted by airport authorities under ICAO and ACI frameworks are driving demand for elevator components manufactured from recycled alloys, low-VOC lubricants, and energy-efficient electronic systems. Elevator oil cups, lubrication felts, and handrail belts are being redesigned with extended service intervals and biodegradable materials to align with net-zero operational goals.
The transition to IP-based and wireless five-party intercom systems represents a fundamental upgrade cycle at airports globally. Traditional wired intercoms are being replaced by encrypted digital communication platforms that integrate with airport-wide security and emergency management systems, driving replacement demand for modern intercom elevator components across aging terminal infrastructure.
Over 200 new international airports and terminal expansions are currently under development across Asia-Pacific, the Middle East, and Africa. This pipeline represents a multi-billion-dollar procurement opportunity for premium elevator car parts, with procurement teams specifying OEM-compatible components from certified global suppliers capable of delivering at scale with full quality documentation.
From departure halls to underground transit connectors, discover the critical application environments for elevator car parts at major international airports.
Public-facing terminal elevators transport millions of travelers annually. Door slide blocks, guide rail wheels, and electronic control boards must deliver whisper-quiet, vibration-free operation while withstanding continuous high-cycle use across multi-level departures, arrivals, and transit concourses.
Connecting airport terminals to inter-modal transit hubs — including metro stations, rail terminals, and automated people movers — these elevator systems operate under mixed-use, high-load conditions. Guide rail sliding shoe linings and skate sets must maintain precision alignment across elevated structural movement loads.
Airport parking garages demand robust, corrosion-resistant elevator components capable of operating in exposed environments with significant temperature variation. Oil cup and lubrication system components are critical to maintaining guide rail performance in these exposed, high-humidity conditions year-round.
Integrated airport hotel towers and retail complexes connected to terminal buildings deploy high-capacity passenger elevators requiring the same performance standards as terminal systems. Control circuit boards and handrail belt systems specified for airport-grade performance ensure consistent, brand-aligned passenger experiences.
Staff and freight elevators in airport restricted areas — cargo handling, airside operations, and security zones — require five-party intercom systems with enhanced access control integration and fail-safe communication redundancy, ensuring uninterrupted operational communication in critical security environments.
Many international airports are modernizing aging elevator fleets installed in the 1990s and 2000s. Our capability in custom manufacturing non-standard, discontinued, and legacy-model components makes us uniquely positioned to supply retrofit projects without requiring full system replacement — minimizing disruption and capital expenditure.
Our comprehensive product portfolio covers every critical sub-system of elevator car operation — sourced, manufactured, and certified to international airport standards.
Foshan Dalong Chain Equipments Sales Co., Ltd. was established in January 2007 (formerly known as Nanhai Yanbu Seelee Elevator Parts Factory, founded in 1990). Throughout its operational history, the company has steadfastly upheld the principles encapsulated in its service motto, "Customer First, Quality First," earning widespread acclaim across its diverse client base.
This commendable reputation has facilitated partnerships with numerous prestigious clients spanning Europe, America, Southeast Asia, the Guangdong-Hong Kong-Macao Greater Bay Area, and Taiwan. Among these esteemed clients are industry leaders such as Otis, Schindler, Hitachi, Kone, Mitsubishi, Fuji, and MTR Singapore, all of whom have recognized the company's commitment to excellence and reliability. It is worth mentioning that we are KONE's global parts strategic cooperative supplier.
Our company operates extensive production facilities totaling over 4,500 square meters located in Suzhou, complemented by additional factories in Shanghai and Nantong. These sites are outfitted with advanced manufacturing equipment and staffed by teams of seasoned professionals. We maintain a rigorous quality control system to ensure each product adheres to international standards. With a wealth of import and export experience, our products are currently exported to over 100 countries.
Our Foshan operations hub ensures that airport clients receive the fastest possible access to parts, expert engineers, and responsive after-sales support.
At our Foshan office, the warehouse is well-stocked with a substantial inventory of commonly utilized spare parts to guarantee ample availability. Additionally, our delivery sector is supported by an effective logistics system, ensuring the swift and punctual distribution of spare parts to our clientele. Simultaneously, we boast a seasoned sales team and a cadre of expert elevator engineers, both fully equipped to furnish our customers with rapid and precise solutions alongside comprehensive after-sales services.
For international airport procurement teams and facility managers, this means a single point of contact capable of handling urgent component requests, technical consultation for complex retrofit scenarios, and custom manufacturing of non-standard or discontinued parts — all within a single, integrated service framework.
For over a decade, Foshan Dalong Chain Equipments Sales Co., Ltd. has upheld a development policy characterized by pragmatism, self-reliance, and innovation. Specializing in the sales of major brand elevator components, we offer an integrated approach that encompasses sales, manufacturing (custom manufacturing of parts for elevators and escalators that are non-standard, discontinued, or of older models) and engineering technical consulting.
We provide our clients in Europe, America, Southeast Asia, the Guangdong-Hong Kong-Macao Greater Bay Area, and Taiwan with comprehensive pre-sales technical consultations, a reliable supply of high-quality parts, and exemplary after-sales service. This holistic approach makes us an ideal partner for international airport operators seeking a single, accountable supplier for all elevator car part requirements — from routine replacement components to bespoke engineering solutions for aging or unique elevator installations.
State-of-the-art production environments across Suzhou, Shanghai, and Nantong — delivering precision-engineered elevator car parts at global scale.
Whether you are managing a scheduled maintenance program, an urgent replacement requirement, or a large-scale airport elevator modernization project, our team is ready to deliver certified, OEM-compatible elevator car parts with fast global logistics and full technical support.
Explore Our Full Product Range →
